These transistors are electronic components ideal for switching circuits and can also be used as an amplifier.
921 Item Items
Warning: Last items in stock!
The transistor is a circuit element that can be used as an electrically operated switch. It is made of semiconductor materials, has three terminals and can interrupt or close the circuit between two terminals depending on the command applied to the control pin.
USE WITH ARDUINO
There are two common types of transistors: bipolar and field-effect
The picture shows the symbol bipolar transistor (left) and an illustration of a universal transistor (right). There are two types of transistors: NPN and PNP (depending on the type of semiconductor material). Its terminals are: B - Base C - Collector E - Emitor
The base will be used to control the transistor. Initially, this will not stream (between C and E). If the voltage base-emitter opening exceeds a threshold (about 0.65 V), it will absorb the current through the base and it will let through (almost) freely between C and E.
The image shows the symbols equivalent field effect transistor (FET - Field Effect Transistor). They work in the same way with one exception: they do not absorb energy when they are constantly open (as opposed to bipolar transistor). Switches faster, but their disadvantage is the fact that the command requires a higher voltage applied to the gate (Gate) - 1.8 ~ 10V
This 2-channel bidirectional level translator...
Red Wire Mini Roll
Mini Submersible Water Pump
The breadboard power supply takes power from...
The LM358 dual operational amplifier chip is...
This flowmeter operates on the basis of the...
Colored mini breadboard, ideal for small...
This is a power supply module which is very...
Hall sensor module YS-27 that can be used to...