The Arduino open source platform is based on easy to use hardware and software and it's intended for artists, hobbyists and everyone who wants to design a creative electronics project.
It uses ATmega32U4 microcontroller.
It is perfect for small projects.
USB Cable is included.
17 Item Items
Warning: Last items in stock!
This development board is the best choice for electronic projects that require a small space occupied by the microcontroller.
1. Install the Arduino IDE development environment.
Arduino IDE is available for free on the official website and can be downloaded by accessing this link. This program is compatible with most development systems (Linux, Mac OS X and Windows).
2. Configure the development environment for use with the development board.
Open the "TOOLS" tab and select the "Arduino/Genuino Micro" development board.
3. Creating the code.
After you install Arduino IDE, you can write the first program for the development board. The programming language used is C ++ (slightly modified).
The code is based on two main functions:
After you have written the program or opened one of the File -> Examples, press the "Check" button or the CTRL + R shortcut to compile the code. If the code is free of syntax errors, the text "Compilation completed" should appear at the bottom.
4. Connect the development board and upload the code.
Connect the board to the computer via a USB cable. After you have connected the board, open the "TOOLS" tab and select the port to which the device is connected.
Press the "Upload" button or CTRL + U shortcut to upload the code to the development board. After you finish writing the code in the memory of the board, you will receive a confirmation message that there were no problems. Otherwise, the upload is stopped and details about the issues will be displayed.
5. Attach the sensors.
The board is compatible with the Arduino Pro Micro, so any sensor for the Arduino Pro Micro can be used with this product.
CAREFUL!!! Be careful not to connect components that consume too much power because you risk breaking the board. Also, observe the polarity of the sensors so as not to destroy them.
This white single-row male 40 copper pin header...
220 Ω Resistor
The buzzer can be used in your Arduino...
Ruler With Capsule For Electronic Components...
This proto shield for Arduino allows you to...
RFID Card 13.56MHz
This straight tweezers is made of high quality...
This is a lone intra-red sensor for use with an...
Very efficient laser diode receiver.
These 5 mm green LEDs are great for your new...