The USB converter to Serial CP2102 is useful for communicating between a 3.3 V or 5 V micro controller and your computer. It is useful to program the micro controllers that does not include USB to serial converter.
This product is a bi-directional logic level converter, it can make a connection between devices operating at different voltages.
This 2-channel bidirectional level translator is used to convert two logic levels. It is useful for facilitating communication between devices operating at 3.3 V and 5 V devices.
ADS1115 Analog-Digital Converter Module for projects where a precision ADC converter is required. Small and easy to add to your projects, provides I2C communication and can link up to 4 modules to a single I2C bus.
This module is based on the MCP2515 controller, operates at a voltage of 5V and is compatible with Arduino. It can easily integrate into different projects thanks to the SPI interface.
This breakout board features the easy-to-use MCP4725 12-bit DAC. Control it via I2C and send it the value you want it to output, and the VOUT pin will have it. Great for audio / analog projects, such as when you can't use PWM but need a sine wave or adjustable bias point.
This 4-channel bi-directional level translator is used to convert two logic levels. It is useful for facilitating communication between devices operating at 3.3 V and 5 V devices.
CJMCU-3247 converter, current from 0/4 mA to 20 mA, maximum output voltage of 24V.
The adapter is designed to transfer the HDMI signal from a computer, laptop, PS3, Xbox etc. to a VGA signal and display at high resolutions such as monitors, LCD TVs, projectors, etc. This is a portable adapter that makes HDMI HD input transfer to VGA output.
This module provides simple solutions to update your serial designs to USB connectivity. It is basically used in microcontroller and computer connection. It provides 5 V and 3.3 V output voltages.
This module converts the signal from a USB interface to a PC / laptop to match the serial module ESP8266. It features CH340 chip and integrated capacitors making it a reliable converter module which is perfect for your projects.
ADS1015 Analog Digital Converter Module for projects where a precision ADC converter is required. Small and easy to add to your projects with I2C communication support.
FT2232HL Module with USB for UART/FIFO/SPI/I2C/JTAG/RS232 Communication
The I2C LCD backpack is a small PCB that can be soldered onto the back of LCD allowing it to be controlled using an I2C bus. This is compatible with LCDs that use HD44780 display controller.