Comes with a detailed and user-friendly tutorial: Free PDF tutorial with...
50 cm USB AM to BM Blue Cable for Arduino Mega and UNO
This product is light-sensitive and very useful for detecting intensity...
Voltmeter and panel ammeter 0-100 V,...
USB Type C Adapter to HDMI useful for applications where you have video output on the C Type USB interface and want to connect to an HDMI input monitor.
This module is based on the ENC28J60 integrated circuit which contains everything necessary to add an Ethernet interface to your embedded projects.
The USB converter to Serial CP2102 is useful for communicating between a 3.3 V or 5 V micro controller and your computer.
ADS1115 Analog-Digital Converter Module for projects where a precision ADC converter is required. Small and easy to add to your projects, provides I2C communication and can link up to 4 modules to a single I2C bus.
This product is a bi-directional logic level converter, it can make a connection between devices operating at different voltages.
Adapter from HDMI Mother to Mini HDMI Tata
Converter mode from analog to digital or vice versa.
This module is a TTL to RS485 converter, compatible with both 3.3V and 5V voltage levels, has interference protection and supports up to 128 devices on the bus.
This module is based on the MCP2515 controller, operates at a voltage of 5V and is compatible with Arduino. It can easily integrate into different projects thanks to the SPI interface.
ADS1015 Analog Digital Converter Module for projects where a precision ADC converter is required. Small and easy to add to your projects with I2C communication support.
FT232RL converter from USB to serial UART used to connect the computer to the microcontroller.
Low cost USB to UART converter based on PL2303 integrated circuit.
This module provides simple solutions to update your serial designs to USB connectivity. It is basically used in microcontroller and computer connection.
This 2-channel bidirectional level translator is used to convert two logic levels. It is useful for facilitating communication between devices operating at 3.3 V and 5 V devices.
RS232 Level Converter with MAX232 ideal for circuits requiring a voltage conversion from RS232 to TTL and vice versa.
This module is a 24-bit Sigma-Delta ADC converter with 3 differential inputs, power supply from 2.7V to 5.25V and an internal oscillator.
The adapter is designed to transfer the HDMI signal from a computer, laptop, PS3, Xbox etc. to a VGA signal and display at high resolutions such as monitors, LCD TVs, projectors, etc. This is a portable adapter that makes HDMI HD input transfer to VGA output.
With the W5100 Ethernet shield, it is very easy to design internet connected circuits and build the internet of things.
SOIC8 SOP8 to DIP8 Adapter
CJMCU-3247 converter, current from 0/4 mA to 20 mA, maximum output voltage of 24V.
Converter from 24V to 12V DC, useful for trucks, buses and other vehicles.
This 4-channel bi-directional level translator is used to convert two logic levels. It is useful for facilitating communication between devices operating at 3.3 V and 5 V devices.
This breakout board features the easy-to-use MCP4725 12-bit DAC. Control it via I2C and send it the value you want it to output, and the VOUT pin will have it. Great for audio / analog projects, such as when you can't use PWM but need a sine wave or adjustable bias point.
Raspberry Pi 3B I/O Expansion Board
Converter mode from RS232 to TTL signals.
This module converts the signal from a USB interface to a PC / laptop to match the serial module ESP8266. It features CH340 chip and integrated capacitors making it a reliable converter module which is perfect for your projects.
USB to RS485 Serial Converter
This is a PCF8574 IO expansion module suitable for MCU I/O expansion.
FT2232HL Module with USB for UART/FIFO/SPI/I2C/JTAG/RS232 Communication
The I2C LCD backpack is a small PCB that can be soldered onto the back of LCD allowing it to be controlled using an I2C bus. This is compatible with LCDs that use HD44780 display controller.
Micro USB to Blue CP2102 converter mode used to generally connect computers to serial-powered equipment.
TXB0104 Bi-Directional Level Shifter (TXB0104)