"1 Wire" 10 CM Male - Female
30 cm 1p Male to Female Wire
This wheel can be used to make Robot Car. It is made up of high-quality...
This M3x12mm hexagon pillar nut fits perfectly with the M3 hexagon pillars.
The KCD1-11-2P rocker switch is basically used to open and close an...
Insulating Tape Red
This sensor can accurately detect temperature and humidity, it is easy to use thanks to the I2C interface, has low power consumption and resolution can be set to 8 or 12 bit for temperature and 12/14 bits for humidity.
This sensor with 0.5m cable is for precision temperature sensing which can be used in laboratory, industrial processes, and more.
Adafruit BME680 - Temperature, Humidity, Pressure and Gas Sensor
DHT21 is a high-performance temperature and humidity sensor, providing accurate measurement, low power consumption, long distance data transmission, automatic calibration and long life.
This module is a digital converter for temperature measurement with PT100 or PT1000 sensors. The conversion method is highly accurate, of the delta-sigma type.
Adafruit PT100 RTD Temperature Sensor Amplifier - MAX31865
Adafruit Thermocouple Amplifier MAX31855 breakout board Module (MAX6675 upgrade)
This sensor with 0.5m cable is for precision temperature sensing which can be used in a laboratory, industrial processes, and more.
This thermistor module is a temperature sensor which digital output that allows you to easily add over-temperature and under-temperature condition sensing capabilities to your new project.
Thermocouples are used to measure temperatures that may exceed 100 ° C. These are stainless steel wires that can measure the temperature of the air or surface.
This I2C digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard i2c. There are 3 address pins so you can connect up to 8 to a single I2C bus without address collisions.