This remote E3D v5 3D printer head (0.4 mm nozzle, 1.75 mm filament) is...
"1 Wire" 10 CM Male - Female
30 cm 1p Male to Female Wire
This wheel can be used to make Robot Car. It is made up of high-quality...
This M3x12mm hexagon pillar nut fits perfectly with the M3 hexagon pillars.
The KCD1-11-2P rocker switch is basically used to open and close an...
The Pololu MinIMU-9 v5 is an inertial measurement unit (IMU) that packs an LSM6DS33 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board. See description for more details about the product. Add to cart now!
This is a module based on the HMC5983 chip triple axis digital compass with high precision and temperature compensation. It provides IIC / SPI communication and an appropriate alternative to HMC5883L.
MPU9250 and BMP280 10DOF has 4 sensors which provide very useful functions for your projects and can be used in a wide range of applications. This module integrates Accelerometer, Gyroscope, Magnetometer and Digital Barometer in one tiny module.
This module is a carrier/breakout board for the ST LIS3MDL three-axis magnetometer. The sensor provides magnetic field strength measurements with a configurable range of ±4 gauss to ±16 gauss that can be read through a digital I²C or SPI interface. See description for more details about the product. Add to cart now!
The LSM6DS33 combines a digital 3-axis accelerometer and 3-axis gyroscope into a single package. The sensor provides six independent acceleration and rotation rate readings whose sensitivities can be set in the ranges of ±2 g to ±16 g and ±125°/s to ±2000°/s, available through I²C and SPI interfaces. See description for more details about the product....
The Pololu AltIMU-10 v5 is an inertial measurement unit (IMU) and altimeter that features the same LSM6DS33 gyro and accelerometer and LIS3MDL magnetometer as the MinIMU-9 v5 and adds an LPS25H digital barometer. See description for more details about the product. Add to cart now!
This MPU6500 module integrates a 3-axis gyroscope, a 3-axis accelerometer and a DMP (Digital Motion Processor), all in one chip. MPU6500 GY Accelerometer and Gyroscope with DMP (Digital Motion Processor) embedded in a small and useful form. With the three sensors available, the projects are countless.