"1 Wire" 10 CM Male - Female
30 cm 1p Male to Female Wire
This wheel can be used to make Robot Car. It is made up of high-quality...
This M3x12mm hexagon pillar nut fits perfectly with the M3 hexagon pillars.
The KCD1-11-2P rocker switch is basically used to open and close an...
Insulating Tape Red
This flowmeter operates on the basis of the magnetic effect, it feeds at voltages between 5 and 18V (DC) and is easy to use - it counts the pulses obtained at the output.
This module is based on an ultrasonic distance detection sensor with 1cm accuracy and a maximum distance of 6m. Can be used in different environments, being waterproof.
This sensor can accurately detect temperature and humidity, it is easy to use thanks to the I2C interface, has low power consumption and resolution can be set to 8 or 12 bit for temperature and 12/14 bits for humidity.
The MQ-3 is a highly sensitive gas sensor to the alcohol concentrations in the atmosphere. It has a low cost and long life with a simple drive circuit and is very useful for detectors used in breath analyzer, environmental monitoring, and in safety devices inside vehicles.
The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module. See description for more details about the product. Add to cart now!
This product is a module with 8 analogue infrared sensors useful for building your own line follower. Infrared sensors are based on the radiation property of this wavelength, ie the white areas reflect the received IR radiation, and the black surfaces absorb the received IR radiation.
This sensor with 0.5m cable is for precision temperature sensing which can be used in laboratory, industrial processes, and more.
Adafruit BME680 - Temperature, Humidity, Pressure and Gas Sensor
This sensor detects several air quality elements with an accuracy of 15%. Easy to use multimeter to the I2C interface.
This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a line-following robot. Pairs of LEDs are arranged in series to halve current consumption, and a MOSFET allows the LEDs to be turned off for additional sensing or power-savings options. See description for more details about the product. Add to...