"1 Wire" 10 CM Male - Female
30 cm 1p Male to Female Wire
This wheel can be used to make Robot Car. It is made up of high-quality...
This M3x12mm hexagon pillar nut fits perfectly with the M3 hexagon pillars.
The KCD1-11-2P rocker switch is basically used to open and close an...
Insulating Tape Red
LTC3780 Buck-Boost synchronous Buck-Boost with adjustable current and voltage (up / down) in your projects where you need to maintain a constant output voltage regardless of the main power supply.
Original Product 2.5 A, 5.1 V power supply designed specifically for Raspberry Pi 3 Model B. This ensures the power required for projects that include connecting high-voltage USB peripherals.
This product is a downward voltage source that can help you build your own adjustable source or to power a wide range of projects running at power up to 200W. The topology of operation is optimized for high power, this being a synchronous buck type.
With this source, you can get a DC voltage of 55V. It has a power of 500W and can be powered from AC power (100-120 / 200-240V).
Adjustable Electronic Load with Display (35 W) This adjustable load can perform instantaneous discharge tests for various voltage sources, chargers, or batteries. It works at voltages between 3.5V and 21V) and has multiple USB ports (Mini USB, USB Type-C, Android data cable, Single wire terminal, or for Al batteries) for quick connection.
This product is a module with 1 solid state relay useful for medium power AC applications. The relay resists up to a voltage of 250 V, alternating current at a frequency of 50 Hz - 60 Hz. The maximum current it holds is 2 A.
This low voltage source can be adjusted, you can get voltages between 0.8V and 17V via potentiometer setting and have a maximum output current of 3A.
This is a micro USB Li Po battery charger module that uses TP4056 integrated circuit with 1 A charging current. It uses a micro USB for connecting the board to computer and works with linear charging. This module can be used to charge single cell battery and it has the ability to protect your lithium battery from overcharging.
This is a break out board for DRV8825 microstepping bipolar stepper motor drive. It can drive a bipolar stepper motor with an output current of up to up to 2.5 A per coil. It is suitable for driving motors at wide range of voltages from 8.2 V to 45 V.
This is an Arduino compatible break out board for the A4988 microstepping stepper motor driver. It can drive a bipolar stepper motor with an output current of up to 2 A per coil.
This self-locking bistable relay module is used to control the high voltage power device such as household appliances,control of various lighting, factory equipment control at a current of up to 10A.
This 600 W DC-DC boost module is perfect for your projects that require higher voltage. This small module provides the ability to increase voltage and adjusted from 12 V to 80 V.
This is an XL4015 5A adjustable step-down DC-DC module which is useful for your projects. This module can be a source of voltage and current for your projects.
This adjustable DC-DC boost converter can be operated from 10 V to 32 V and it can output a voltage up to 35 V. It can be used in powering up various electronic devices and embedded systems.
This product is an AC DC voltage source that feeds to the 230V AC supply network and provides a fixed and stable 12V DC output voltage supplying a maximum current of 30A. Also, the maximum power output from the source is 360W.